Design of FRP Cooling Towers

Design of FRP Cooling Towers.The FRP Cooling Towers are available in any size of counter flow design with film fill and splash fill design. The FRP Cooling Towers are light weighted. It has a non corrosive with high strength structure with FRP Cooling Tower Design Parts. FRP construction time is very less than other Manufacturing Cooling Towers.It has reliability measure and ultimate structure and technology. Its a well suited for Water Applications.

Design Structure of FRP Cooling Towers:

FRP Cooling Towers are light weighted. It has a non corrosive with high strength structure. FRP constrcution time is very less than other Manufacturing Cooling Towers.FRP Cooling Towers are available in any size of
counter flow design with film fill and splash fill design.It has reliability measure and ultimate structure and technology. Its a well suited for Water Applications.

FRP Cooling Tower is made up of Fiberglass material with dip galvanized. Its also available in Stainless Steel but it cost more than normal frp cooling tower. Casing is made up of Corrugated Frp Sheets.Fan Deck is
structured by robust and strong panel sheets and Frp fans are also very well deisgned. GRP material is used for making of Fan Cylinder.The Drift Eliminator is make and designed with efficient of pvc cellular mode.

The next denotes that Nozzles also made up of pvc and non clogging and Drive shaft is dual with balance steel material in open constructions. Gear Box of Spiral bevel or Spiral Bevel as well as helical design structure.
It tested as zero defect result before its sent out from outlet of factory. Its sents for testing process like shipment,load testing of every gear box. Louvers has to fix if any mode of situation available in Frp cooling
tower then electirc motor will suitable for their convinient of FRP Cooling Tower. Cold Water Basin also used for FRP if applicable.

Types of FRP Cooling Towers:

FRP Square Shape
FRP Bottle Shape
FRP Seamless

FRP Cooling Tower Design Parts:

Water Proof
Motor
Fan Guard
Fan
Turn Buckle
Tension Bar
PVC Eliminator
Branch Pipe
FRP Eliminator Blades
Sprinkler
Stand Pipe
FRP Casing
PVC Fillings
Stand Pipe
Suction Tank
FRP Basin
Air Intake Mesh

Casing:

This segment were designed and manufactured with extra strong material and that can be manage with effortless during the transmission and its also power of the time of Frp Cooling Tower maintenance works.

Fill:

Its accomplish as full comprises of Rigid PVC model and UV stabilized model. It has a mixture of honey comb and film flow type made structure parts. It also offering good designed and most highest unit per volume
for airflow with least resistance.

Fan:

The Fan is must very important for this frp cooling tower. It design is look like axial flow model and inclusion of cast aluminum and fitting of pitch aerofill blades on hubs with bolts and nuts. Most of Balanced Fan
Customization Assembly will be mounted on direct shaft of weather proof, flanged motor.

Water Distribution:

Hot water is distributed with same flowover the fill through Polypropylene fitted on PVC distribution piping. It has two tower body structure through inspection window.

Drift Eliminator:

The drift eliminator consists of rigid PVC blades with P.P. spacers, about the water circulation rate. Its also offering minimum resistance to air flow.

FRP Basin:

FRP basin is fitted the tower on top. The Slabs may occured in the FRP basin and its developed by make of drain connection resistance and overflow with suction.

For more information about Cooling Tower